Viewing file:  sfp-machine.h (5.07 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* Decide whether to use 64 or 32-bit types to do the emulation. If we are
doing IEEE-128 with VSX, use 64-bit emulation even if we are compiling for a
32-bit target. */
#if defined(_ARCH_PPC64) || defined(__VSX__) || defined(__FLOAT128__)
#define _FP_W_TYPE_SIZE 64
#define _FP_W_TYPE unsigned long long
#define _FP_WS_TYPE signed long long
#define _FP_I_TYPE long long
#ifdef _ARCH_PPC64
typedef int TItype __attribute__ ((mode (TI)));
typedef unsigned int UTItype __attribute__ ((mode (TI)));
#define TI_BITS (__CHAR_BIT__ * (int)sizeof(TItype))
#endif
#else /* 32-bits */
#define _FP_W_TYPE_SIZE 32
#define _FP_W_TYPE unsigned int
#define _FP_WS_TYPE signed int
#define _FP_I_TYPE int
#endif /* 32-bits */
/* The type of the result of a floating point comparison. This must
match `__libgcc_cmp_return__' in GCC for the target. */
typedef int __gcc_CMPtype __attribute__ ((mode (__libgcc_cmp_return__)));
#define CMPtype __gcc_CMPtype
#define _FP_MUL_MEAT_S(R,X,Y) \
_FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
#if (_FP_W_TYPE_SIZE==64)
#define _FP_MUL_MEAT_D(R,X,Y) \
_FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
#define _FP_MUL_MEAT_Q(R,X,Y) \
_FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
#else
#define _FP_MUL_MEAT_D(R,X,Y) \
_FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
#define _FP_MUL_MEAT_Q(R,X,Y) \
_FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
#endif
#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_loop(S,R,X,Y)
#if (_FP_W_TYPE_SIZE==64)
#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_1_udiv(D,R,X,Y)
#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_2_udiv(Q,R,X,Y)
#else
#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y)
#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y)
#endif
#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1)
#if (_FP_W_TYPE_SIZE==64)
#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1)
#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1
#else
#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1
#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
#endif
#define _FP_NANSIGN_S 0
#define _FP_NANSIGN_D 0
#define _FP_NANSIGN_Q 0
#define _FP_KEEPNANFRACP 1
#define _FP_QNANNEGATEDP 0
/* Someone please check this. */
#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \
do { \
if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \
&& !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \
{ \
R##_s = Y##_s; \
_FP_FRAC_COPY_##wc(R,Y); \
} \
else \
{ \
R##_s = X##_s; \
_FP_FRAC_COPY_##wc(R,X); \
} \
R##_c = FP_CLS_NAN; \
} while (0)
#define _FP_TININESS_AFTER_ROUNDING 0
#define __LITTLE_ENDIAN 1234
#define __BIG_ENDIAN 4321
#if defined __BIG_ENDIAN__ || defined _BIG_ENDIAN
# if defined __LITTLE_ENDIAN__ || defined _LITTLE_ENDIAN
# error "Both BIG_ENDIAN and LITTLE_ENDIAN defined!"
# endif
# define __BYTE_ORDER __BIG_ENDIAN
#else
# if defined __LITTLE_ENDIAN__ || defined _LITTLE_ENDIAN
# define __BYTE_ORDER __LITTLE_ENDIAN
# else
# error "Cannot determine current byte order"
# endif
#endif
/* Only provide exception support if we have hardware floating point using
floating point registers and we can execute the mtfsf instruction. This
would only be true if we are using the emulation routines for IEEE 128-bit
floating point on pre-ISA 3.0 machines without the IEEE 128-bit floating
point support. */
#ifdef __FLOAT128__
#define ISA_BIT(x) (1LL << (63 - x))
/* Use the same bits of the FPSCR. */
# define FP_EX_INVALID ISA_BIT(34)
# define FP_EX_OVERFLOW ISA_BIT(35)
# define FP_EX_UNDERFLOW ISA_BIT(36)
# define FP_EX_DIVZERO ISA_BIT(37)
# define FP_EX_INEXACT ISA_BIT(38)
# define FP_EX_ALL (FP_EX_INVALID | FP_EX_OVERFLOW \
| FP_EX_UNDERFLOW | FP_EX_DIVZERO \
| FP_EX_INEXACT)
void __sfp_handle_exceptions (int);
# define FP_HANDLE_EXCEPTIONS \
do { \
if (__builtin_expect (_fex, 0)) \
__sfp_handle_exceptions (_fex); \
} while (0)
/* The FP_EX_* bits track whether the exception has occurred. This macro
must set the FP_EX_* bits of those exceptions which are configured to
trap. The FPSCR bit which indicates this is 22 ISA bits above the
respective FP_EX_* bit. Note, the ISA labels bits from msb to lsb,
so 22 ISA bits above is 22 bits below when counted from the lsb. */
# define FP_TRAPPING_EXCEPTIONS ((_fpscr.i << 22) & FP_EX_ALL)
# define FP_RND_NEAREST 0x0
# define FP_RND_ZERO 0x1
# define FP_RND_PINF 0x2
# define FP_RND_MINF 0x3
# define FP_RND_MASK 0x3
# define _FP_DECL_EX \
union { unsigned long long i; double d; } _fpscr __attribute__ ((unused)) = \
{ .i = FP_RND_NEAREST }
#define FP_INIT_ROUNDMODE \
do { \
__asm__ __volatile__ ("mffs %0" \
: "=f" (_fpscr.d)); \
} while (0)
# define FP_ROUNDMODE (_fpscr.i & FP_RND_MASK)
#endif /* !__FLOAT128__ */
/* Define ALIASNAME as a strong alias for NAME. */
# define strong_alias(name, aliasname) _strong_alias(name, aliasname)
# define _strong_alias(name, aliasname) \
extern __typeof (name) aliasname __attribute__ ((alias (#name)));
|
