Viewing file: linux64.h (9.47 KB) -rw-r--r-- Select action/file-type: (+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
/* Definitions for 64-bit SPARC running Linux-based GNU systems with ELF. Copyright (C) 1996-2022 Free Software Foundation, Inc. Contributed by David S. Miller (davem@caip.rutgers.edu)
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3, or (at your option) any later version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with GCC; see the file COPYING3. If not see <http://www.gnu.org/licenses/>. */
#define TARGET_OS_CPP_BUILTINS() \ do \ { \ GNU_USER_TARGET_OS_CPP_BUILTINS(); \ if (TARGET_ARCH64) \ builtin_define ("_LONGLONG"); \ if (TARGET_ARCH32 \ && TARGET_LONG_DOUBLE_128) \ builtin_define ("__LONG_DOUBLE_128__"); \ } \ while (0)
/* On Linux, the combination sparc64-* --with-cpu=v8 is supported and selects a 32-bit compiler. */ #if defined(TARGET_64BIT_DEFAULT) && TARGET_CPU_DEFAULT >= TARGET_CPU_v9 #undef TARGET_DEFAULT #define TARGET_DEFAULT \ (MASK_V9 + MASK_64BIT + MASK_PTR64 + MASK_STACK_BIAS + \ MASK_V8PLUS + MASK_APP_REGS + MASK_FPU + MASK_LONG_DOUBLE_128) #endif
/* This must be v9a not just v9 because by default we enable -mvis. */ #undef ASM_CPU64_DEFAULT_SPEC #define ASM_CPU64_DEFAULT_SPEC "-Av9a"
#undef ENDFILE_SPEC #define ENDFILE_SPEC \ GNU_USER_TARGET_ENDFILE_SPEC \ "%{Ofast|ffast-math|funsafe-math-optimizations:crtfastmath.o%s}"
/* The default code model. */ #undef SPARC_DEFAULT_CMODEL #define SPARC_DEFAULT_CMODEL CM_MEDLOW
#undef WCHAR_TYPE #define WCHAR_TYPE "int"
#undef WCHAR_TYPE_SIZE #define WCHAR_TYPE_SIZE 32
/* Define for support of TFmode long double. SPARC ABI says that long double is 4 words. */ #undef LONG_DOUBLE_TYPE_SIZE #define LONG_DOUBLE_TYPE_SIZE (TARGET_LONG_DOUBLE_128 ? 128 : 64)
#undef CPP_SUBTARGET_SPEC #define CPP_SUBTARGET_SPEC "\ %{posix:-D_POSIX_SOURCE} \ %{pthread:-D_REENTRANT} \ "
/* Provide a LINK_SPEC appropriate for GNU/Linux. Here we provide support for the special GCC options -static and -shared, which allow us to link things in one of these three modes by applying the appropriate combinations of options at link-time.
When the -shared link option is used a final link is not being done. */
#define GLIBC_DYNAMIC_LINKER32 "/lib/ld-linux.so.2" #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux.so.2"
#ifdef SPARC_BI_ARCH
#undef SUBTARGET_EXTRA_SPECS #define SUBTARGET_EXTRA_SPECS \ { "link_arch32", LINK_ARCH32_SPEC }, \ { "link_arch64", LINK_ARCH64_SPEC }, \ { "link_arch_default", LINK_ARCH_DEFAULT_SPEC }, \ { "link_arch", LINK_ARCH_SPEC },
#define LINK_ARCH32_SPEC "-m elf32_sparc %{shared:-shared} \ %{!shared: \ %{!static: \ %{rdynamic:-export-dynamic} \ -dynamic-linker " GNU_USER_DYNAMIC_LINKER32 "} \ %{static:-static}} \ "
#define LINK_ARCH64_SPEC "-m elf64_sparc %{shared:-shared} \ %{!shared: \ %{!static: \ %{rdynamic:-export-dynamic} \ -dynamic-linker " GNU_USER_DYNAMIC_LINKER64 "} \ %{static:-static}} \ "
#define LINK_ARCH_SPEC "\ %{m32:%(link_arch32)} \ %{m64:%(link_arch64)} \ %{!m32:%{!m64:%(link_arch_default)}} \ "
#define LINK_ARCH_DEFAULT_SPEC \ (DEFAULT_ARCH32_P ? LINK_ARCH32_SPEC : LINK_ARCH64_SPEC)
#undef LINK_SPEC #define LINK_SPEC "\ %(link_arch) \ %{!mno-relax:%{!r:-relax}} \ "
/* -mcpu=native handling only makes sense with compiler running on a SPARC chip. */ #if defined(__sparc__) && defined(__linux__) extern const char *host_detect_local_cpu (int argc, const char **argv); # define EXTRA_SPEC_FUNCTIONS \ { "local_cpu_detect", host_detect_local_cpu },
# define MCPU_MTUNE_NATIVE_SPECS \ " %{mcpu=native:%<mcpu=native %:local_cpu_detect(cpu)}" \ " %{mtune=native:%<mtune=native %:local_cpu_detect(tune)}" #else # define MCPU_MTUNE_NATIVE_SPECS "" #endif
#define DRIVER_SELF_SPECS MCPU_MTUNE_NATIVE_SPECS
/* -fsanitize=address is currently only supported for 32-bit. */ #define ASAN_REJECT_SPEC \ "%{!%:sanitize(thread):%e-fsanitize=address is not supported in this configuration}"
#undef ASAN_CC1_SPEC #if DEFAULT_ARCH32_P #define ASAN_CC1_SPEC \ "%{%:sanitize(address):-funwind-tables %{m64:" ASAN_REJECT_SPEC "}}" #else #define ASAN_CC1_SPEC \ "%{%:sanitize(address):-funwind-tables %{!m32:" ASAN_REJECT_SPEC "}}" #endif
#undef CC1_SPEC #if DEFAULT_ARCH32_P #define CC1_SPEC GNU_USER_TARGET_CC1_SPEC ASAN_CC1_SPEC \ "%{m32:%{m64:%emay not use both -m32 and -m64}} \ %{m64:-mptr64 -mstack-bias -mlong-double-128 \ %{!mcpu*:-mcpu=ultrasparc} \ %{!mno-vis:%{!mcpu=v9:-mvis}}}" #else #define CC1_SPEC GNU_USER_TARGET_CC1_SPEC ASAN_CC1_SPEC \ "%{m32:%{m64:%emay not use both -m32 and -m64}} \ %{m32:-mptr32 -mno-stack-bias %{!mlong-double-128:-mlong-double-64} \ %{!mcpu*:-mcpu=cypress}} \ %{mv8plus:-mptr32 -mno-stack-bias %{!mlong-double-128:-mlong-double-64} \ %{!mcpu*:-mcpu=v9}} \ %{!m32:%{!mcpu*:-mcpu=ultrasparc}} \ %{!mno-vis:%{!m32:%{!mcpu=v9:-mvis}}}" #endif
/* Support for a compile-time default CPU, et cetera. The rules are: --with-cpu is ignored if -mcpu is specified; likewise --with-cpu-32 and --with-cpu-64. --with-tune is ignored if -mtune is specified; likewise --with-tune-32 and --with-tune-64. --with-float is ignored if -mhard-float, -msoft-float, -mfpu, or -mno-fpu are specified. In the SPARC_BI_ARCH compiler we cannot pass %{!mcpu=*:-mcpu=%(VALUE)} here, otherwise say -mcpu=v7 would be passed even when -m64. CC1_SPEC above takes care of this instead.
Note that the order of the cpu* and tune* options matters: the config.gcc file always sets with_cpu to some value, even if the user didn't use --with-cpu when invoking the configure script. This value is based on the target name. Therefore we have to make sure that --with-cpu-32 takes precedence to --with-cpu in < v9 systems, and that --with-cpu-64 takes precedence to --with-cpu in >= v9 systems. As for the tune* options, in some platforms config.gcc also sets a default value for it if the user didn't use --with-tune when invoking the configure script. */ #undef OPTION_DEFAULT_SPECS #if DEFAULT_ARCH32_P #define OPTION_DEFAULT_SPECS \ {"cpu_32", "%{!m64:%{!mcpu=*:-mcpu=%(VALUE)}}" }, \ {"cpu_64", "%{m64:%{!mcpu=*:-mcpu=%(VALUE)}}" }, \ {"cpu", "%{!m64:%{!mcpu=*:-mcpu=%(VALUE)}}" }, \ {"tune_32", "%{!m64:%{!mtune=*:-mtune=%(VALUE)}}" }, \ {"tune_64", "%{m64:%{!mtune=*:-mtune=%(VALUE)}}" }, \ {"tune", "%{!mtune=*:-mtune=%(VALUE)}" }, \ {"float", "%{!msoft-float:%{!mhard-float:%{!mfpu:%{!mno-fpu:-m%(VALUE)-float}}}}" } #else #define OPTION_DEFAULT_SPECS \ {"cpu_32", "%{m32:%{!mcpu=*:-mcpu=%(VALUE)}}" }, \ {"cpu_64", "%{!m32:%{!mcpu=*:-mcpu=%(VALUE)}}" }, \ {"cpu", "%{!m32:%{!mcpu=*:-mcpu=%(VALUE)}}" }, \ {"tune_32", "%{m32:%{!mtune=*:-mtune=%(VALUE)}}" }, \ {"tune_64", "%{!m32:%{!mtune=*:-mtune=%(VALUE)}}" }, \ {"tune", "%{!mtune=*:-mtune=%(VALUE)}" }, \ {"float", "%{!msoft-float:%{!mhard-float:%{!mfpu:%{!mno-fpu:-m%(VALUE)-float}}}}" } #endif
#if DEFAULT_ARCH32_P #define MULTILIB_DEFAULTS { "m32" } #else #define MULTILIB_DEFAULTS { "m64" } #endif
#else /* !SPARC_BI_ARCH */
#undef LINK_SPEC #define LINK_SPEC "-m elf64_sparc -Y P,%R/usr/lib64 %{shared:-shared} \ %{!shared: \ %{!static: \ %{rdynamic:-export-dynamic} \ -dynamic-linker " GNU_USER_DYNAMIC_LINKER64 "} \ %{static:-static}} \ %{!mno-relax:%{!r:-relax}} \ "
#endif /* !SPARC_BI_ARCH */
/* It's safe to pass -s always, even if -g is not used. */ #undef ASM_SPEC #define ASM_SPEC "\ -s \ %{" FPIE_OR_FPIC_SPEC ":-K PIC} \ %{!.c:%{findirect-dispatch:-K PIC}} \ %(asm_cpu) %(asm_arch) %(asm_relax)"
#undef ASM_OUTPUT_ALIGNED_LOCAL #define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN) \ do { \ fputs ("\t.local\t", (FILE)); \ assemble_name ((FILE), (NAME)); \ putc ('\n', (FILE)); \ ASM_OUTPUT_ALIGNED_COMMON (FILE, NAME, SIZE, ALIGN); \ } while (0)
#undef COMMON_ASM_OP #define COMMON_ASM_OP "\t.common\t"
#undef LOCAL_LABEL_PREFIX #define LOCAL_LABEL_PREFIX "."
/* DWARF bits. */
/* Follow Irix 6 and not the Dwarf2 draft in using 64-bit offsets. Obviously the Dwarf2 folks haven't tried to actually build systems with their spec. On a 64-bit system, only 64-bit relocs become RELATIVE relocations. */
/* #define DWARF_OFFSET_SIZE PTR_SIZE */
#undef DITF_CONVERSION_LIBFUNCS #define DITF_CONVERSION_LIBFUNCS 1
#ifdef HAVE_AS_TLS #undef TARGET_SUN_TLS #undef TARGET_GNU_TLS #define TARGET_SUN_TLS 0 #define TARGET_GNU_TLS 1 #endif
/* We use GNU ld so undefine this so that attribute((init_priority)) works. */ #undef CTORS_SECTION_ASM_OP #undef DTORS_SECTION_ASM_OP
/* Static stack checking is supported by means of probes. */ #define STACK_CHECK_STATIC_BUILTIN 1
#undef NEED_INDICATE_EXEC_STACK #define NEED_INDICATE_EXEC_STACK 1
#ifdef TARGET_LIBC_PROVIDES_SSP /* sparc glibc provides __stack_chk_guard in [%g7 + 0x14], sparc64 glibc provides it at [%g7 + 0x28]. */ #define TARGET_THREAD_SSP_OFFSET (TARGET_ARCH64 ? 0x28 : 0x14) #endif
/* Define if long doubles should be mangled as 'g'. */ #define TARGET_ALTERNATE_LONG_DOUBLE_MANGLING
/* We use glibc _mcount for profiling. */ #undef NO_PROFILE_COUNTERS #define NO_PROFILE_COUNTERS 1
|